Items sold by HP.com are not for immediate resale. These terms apply only to products sold by HP.com reseller offers may vary. Correct prices and promotions are validated at the time your order is placed. Despite our best efforts, a small number of items may contain pricing, typography, or photography errors. Quantity limits may apply to orders, including orders for discounted and promotional items. Price protection, price matching or price guarantees do not apply to Intra-day, Daily Deals or limited-time promotions. Prices, specifications, availability and terms of offers may change without notice. Close the door to the printer and try printing again.Repeat with any other cartridge that displays printing issues.You can also allow the cartridge to air-dry for 10 minutes before replacing Dry with a new swab and place back into the printer according to the manufacturer’s directions.Use only distilled water and never alcohol or another cleaning agent Use a lightly moistened and clean, foam rubber swab to clean the surface and spaces around the ink nozzle. Be careful not to touch the ink nozzle plate directly.Set the cartridge on a clean piece of white paper with the ink nozzles pointing up.Open the door to access the cartridge - again, this varies by model.Lower the latch handle to seat it in place Dry the contact area before replacing the printhead.When no more ink appears on the cloth, you are done Use a new, damp, lint-free cloth and wipe them from top to bottom, using new cloths with each pass. Locate the electrical contacts inside the printer (refer to your manual for details).Use a dry, lint-free cloth to make sure everything is dry.Wipe the plastic ramps on either side of the nozzles, wiping in the direction away from the nozzles.Wipe away any excess ink from the edge between the nozzles and contacts with a new, damp cloth.Make sure you don’t touch the metal contacts with your fingers Avoid wiping beyond this area and clean until no new ink shows on the cleaning cloth. Dampen a clean, lint-free cloth or paper (coffee filters work best) with distilled water and wipe the electrical contact squares from the bottom to the top.Lift it until it pulls up and lift the printhead out of the printer There is a latch handle on the side of the print carriage.Set the cartridges on a clean piece of white paper with the ink nozzles pointing up.Remove only one cartridge at a time and do not leave ink cartridges out of the printer for more than 30 minutes at a time Push the release tab on the printer cartridge and pull it out of the printer.Wait until the cartridges have stopped moving and are in the center of the carriage.Open the door to access the cartridge - this varies by model.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |